Why does the screen on the monitor freeze? | Arenti

If the Arenti Alnanny display screen freezes, there may be several reasons:

1. Monitoring equipment failure: Monitoring equipment may have a failure, such as hardware failure, software failure, etc., resulting in the monitoring screen does not move or can not be displayed.
2. Network failure: If the monitoring device uses network connection, there may be a network failure, such as network delay, network interruption, etc., which causes the monitor screen not moving or cannot be displayed. Please make sure that the monitoring is located within the range of the network receiver.
3. Power Failure: If the power supply of the monitoring device is faulty, it may cause the device cannot work normally, which results in the monitoring screen not moving or cannot be displayed. Please make sure the monitor is connected to the power adapter and the power adapter is connected to a functioning outlet.
4. Software Setting Problems: If the software used by the monitoring device is not set correctly, such as incorrect settings for screen freezing, screen scaling, etc., it may result in the monitoring screen not moving or not being able to be displayed.

If you have encountered the problem of monitoring screen not moving, you can try to check the above aspects to find the problem and fix it. If you can't solve the problem, it is recommended to contact the relevant technicians to deal with it.